In the second image, you can see at the top left that a long shelf was added over the garage door (for a row of plastic storage bins). You can also see a small circular window (sun light) in the ceiling. Note the garage door also has a row of small windows of across the top, so the room does have more natural light than the typical garage built in Florida (even without opening the garage door). These homeowners loved having the fresh air and breeze, but wanted to keep out bugs, so they are planning to add a movable screen (made by Lifestyle Garage Door Screens).
Larger projects might entail hiring an architect or structural engineer. If you're having trouble deciding on the specifics of a garage remodel, consider hiring an interior designer. Costs for these professionals vary depending on their experience and level of involvement in the project; you could pay a few hundred dollars for a one-time consultation or several thousand dollars for beginning to end involvement.
The computer-controlled drive system makes use of no screws or chain. The body of the system is installed directly over the door. Having the system mounted above the door assists in garages that have low clearance. Likewise, it provides much more ceiling area which can be used for storage.
They are rather low-cost concerning $130 Screw drives consists of a threaded lead screw. They begin at about $150 The newer designs include plastic lined tracks to lower the noise as well as enhance the rate of opening. Belt drives are the costliest as well as the quietest. They begin at about $170.

As detailed above, our Dallas home renovation team have extensive experience building garages plus as specialists in the field of emergency restoration services. That gives us a few clear advantages over most contractors that offer garage remodeling in Dallas (and the advantages are big ones): our speed, our ease complying with insurance company guidelines (and city codes), plus our respect for regulations on future resale of real estate.
You may have to drill holes through studs or through the top plate of walls to reroute wires. If so, be sure to center the holes on the stud. If the plastic-sheathed cables are too short to reach the next box when you reroute them, you can add a junction box and splice on a length of cable. The new box must be accessible either in the attic space or through a blank cover on the wall or ceiling.
×