" There is a press amongst household structure service providers to offer their consumers the choice of giving garage warmth to the new homebuyer", states Matt Worker, of Infra-Red Products Supply, Inc., situated in Draper, Utah. "As a matter of fact, when offered the choice by the building contractor, the buyer will certainly almost always choose to have the specialist shield the garage together with the remainder of the house during the building and construction phase.

Next, how important is it to you that in the event of any unexpected event, such as a tree falling on your remodeled garage, that your insurance will cover the cost to restore the property to the prior condition? If that is important to you, and we suggest that it would be very important to you if it happened, then you need to hire a contractor who is committed to observing all relevant regulations, getting all the proper permits from the city of Dallas, and following all the building codes to pass the building inspection. 

Before you install the drywall, temporarily remove the brackets that support the garage door tracks and opener. This will make it easier to install the 4-mil poly and ceiling drywall and will result in a neater-looking job. Start by carefully measuring and recording the position of the tracks and opener. Measure from the nearest wall and from the floor. Then close the garage door, lock it closed and unplug the opener to disable it. Unscrew or unbolt the brackets that support the garage door tracks and remove them. Also remove the garage door opener brackets and support the opener on a ladder. It may be easier to entirely disconnect the opener and set it aside. Reinstall the garage door track brackets using a new section of angle iron on the ceiling. Attach each new ceiling angle iron with four 5/16-in. x 3-in. lag screws driven into the center of the ceiling joist or into wood blocking that’s screwed to the adjacent ceiling framing.
Unlike many other home remodeling projects, it’s very easy to tell when you need to replace your garage door spring; your overhead garage door won’t open or perhaps more obvious, the weight of the door is off. When your spring is working correctly, you should be able to manually lift the garage door very easily. Likewise, when you open it, the garage door should not move and stay where you left it. If the garage door is very heavy or it closes as soon as you let go, then you need a new spring.
This post is sponsored by The Home Depot. I acknowledge that The Home Depot is partnering with me to participate in the promotional program described above (the “Program”). As a part of the Program, I am receiving compensation in the form of products and services, for the purpose of promoting The Home Depot. All expressed opinions and experiences are my own words. My post complies with the Word Of Mouth Marketing Association (WOMMA) Ethics Code and applicable Federal Trade Commission guidelines.

Garage floor coatings fail for a number of reasons. First, the floor is usually not clean enough to receive a coating. Years of grime have to be removed using solvents and proprietary cleaners. These are sold at paint stores, hardware stores, home centers and industrial supply houses. If the floor is really filthy, consider pressure washing. Rent a machine that produces at least 1,200 to 2,000 psi. Also, buy some grease-cutting detergent at the rental store. Along similar lines, you might consider a steam cleaner if a pressure washer is unavailable.


A garage workbench is a necessary piece of tools in any house workshop. A selection of pre made workbenches are readily available to fit your requirements.

You guys always ask where I shoot? Believe it or not, in my garage! I have been dialing in where my backdrops live for a month now but didn’t know how to tackle the remaining wall in the garage. Home Depot came to the rescue! I have partnered up with THD to give my garage a #cleansweep. I am showing you how I go about a DIY garage makeover - turning this wall full of stuff we didn’t need/know we had into a one stop shop for cleaning, organizing and a place to stay inspired with all my projects. This is a dream come true! AH! Ok, go watch and swoon with me. Stay rad xx.

And you really need your investments protected, but you just don’t have the funds to build some of these other options. Well, don’t give up hope. This video shows you how to build a pretty decent structure that will do what you need it to do for basically no money. And honestly, if you have the materials on hand it could actually be built for free.


One of the major concerns people may have with heating their garage is cost. The bright side exists are numerous ways to warm a garage to fit almost any kind of budget. Alternatives include gas forced air (unit heating systems), electrical forced air, direct vent wall surface heating units, infra-red tube heaters as well as vent complimentary heating systems.
Add between $75 and $500 to your budget for the cost of outlet installation. Most garages have electricity of some sort, even if it's just a bare bulb in the ceiling and a few outlets spaced around the walls. If you're trying to convert your garage into living space, you'll need a nearby licensed electrician to add more wiring and outlets for additional electrical devices.
One of the most cost effective as well as prominent heating systems on the market is the Heatstar H25N vent complimentary garage heating unit by Enerco. This is an infra-red radiant heating unit made specifically for little shops as well as household garages.

The screw-drive system has a lifting apparatus that relocates the length of a steel rod. The system needs little upkeep because of the really few relocating components. The system body is installed in the garage ceiling.
Prices can range from $450.00 to $2,500.00( set up), depending upon garage size and the sort of home heating home appliance. (The writer of this write-up strongly advises a home appliance that is CSA authorized for property use.
Hiring a remodeling expert really is necessary. A professional will ensure that all building permits and inspections are up to date. They can also redo your garage space to make it more appealing -- both visually and functionally. Garages are an important consideration for homebuyers when deciding whether to buy a property. Displaying a professional finish can go a long way in helping you get the best price possible for your home.
Another problem is moisture vapor. Moisture vapor from the ground works from below to loosen the coating's bond with the concrete. In the case of alkyd paints (also called oil-based paints), the moisture will react with the alkaline materials in the concrete and form a soap. This process is called saponification. The soap loosens the paint's bond with the concrete. Never use alkyd or modified alkyd paints on concrete.
They are the ones who are experts at measuring how serious a problem is. We are the ones who are experts at preventing absolutely any problems... even in the most bizarre and complicated situations. For us, the kinds of challenges in a typical garage remodeling job that can be hidden from or frustrating to most general contractors are "a piece of cake."
One of the major concerns people may have with heating their garage is cost. The bright side exists are numerous ways to warm a garage to fit almost any kind of budget. Alternatives include gas forced air (unit heating systems), electrical forced air, direct vent wall surface heating units, infra-red tube heaters as well as vent complimentary heating systems.

One issue that can be a drawback for people who are in a rush is that, for major remodeling projects in Dallas, we may not be available as fast as you would prefer. Our availability can fluctuate considerably, especially if our restoration crews get extremely busy during monsoon season with a lot of hail storms or flooding. Again, when you contact us, we will be totally honest with you as to how soon we can begin your garage remodel. Fortunately, our crews are very fast (because of superior skill and planning), so our efficiency can balance out the fact that we may only be available a week or two later than contractors who are not as busy (who are not in as much demand). Contact us now to find out about our current availability for your garage remodeling project in Dallas.
On top of that, when offered the choice, the buyer will at least go with a gas line link and/or the necessary electric links to handle a home heating appliance-- with the suggestion of having a heating system installed in the future. Now more often than ever before, a garage heating system is mounted during the lasts of house construction. It's a feature property owners desire as well as an additional earnings motivation for the home builder."
Having a lot of space in your garage is everyone dream, in creating more space for the storage in your garage would not depend on how big and large your garage is. This is about how do you allocate all of your stuff and tools in a correct way, for example, to put anything back to its place that sometimes may help you, to make your garage in organize.

Simple garage remodeling projects such as clearing a stain, adding insulation or repairing a garage door opener can be completed by active DIYers. However, if you’re converting your garage into a living area or adding any electrical or HVAC to the space, you should hire a professional. Piping, electricity and garage door springs are dangerous if handled incorrectly. Furthermore, simple mistakes garage pros do not make could end up costing you more in the long run. Therefore, play it safe and get a few quotes from garage pros before you start any garage remodeling project.
Chain drive system: By far one of the most popular as well as economical opening device.
In these situations, a small investment in upgrades to the garage is quite practical, particularly when considering the price of a new home loan and also connected expenses of moving. A warmed, climatized garage can offer just that little added room to expand as well as make the garage useful year-round.
An insulated garage will stay cooler in the summer and warmer in the winter. The first step is to be sure the attic is well ventilated. Check to see how many attic and roof vents you have. A good rule of thumb is a total of 1 sq. ft. (144 sq. in.) of vent opening per 300 sq. ft. of attic divided between the soffit and roof vents. For a typical 20 x 22-ft. garage, you’d need about six 4-in. x 12-in. soffit vents and two standard square roof vents. Make sure your ventilation is effective by installing vent chutes between the trusses. Vent chutes have a channel that prevents blown insulation from blocking the airflow from the soffit vents to the attic space. Plug the area under the vent with wood blocking or plastic and a chunk of fiberglass insulation to prevent wind from blowing up through the insulation or insulation from filling the soffit.
A garage can be so much more than a messy catch-all for items that don’t fit inside the home. Through a remodel, it can be made into an organized storage unit or a workshop, or simply made more functional, with room for at least one car. Turning a standard 600-square-foot, two-car garage into a well-organized, tidy space is less expensive than most remodeling projects. Because a garage already has a floor, walls and a roof, the primary tasks are finishing the framed walls and adding organizational systems.
For best outcomes, choose top quality wood, oak or a wood plywood is an outstanding option. Usage numerous layers of polyurethane to shield the top of the bench. Make certain to sand between each coat. When functioning on projects later, an excellent urethane finishing makes messes easier to clean up.
That's easier to do prior to sheet shaking the walls, yet even glued on foam or blue board can make a remarkable distinction in reducing down heat loss. In enhancement, an economical door seal (readily available from most garage door vendors) can reduce down on infiltration of chilly air from the outside around the boundary of the overhanging garage door.

We are very familiar with the unique issues in Dallas like cracking foundations due to the slow sinking of underground "water tables." When the water underneath the soil is depleted, that can change the elevation of a single corner of the building over the course of decades (or even suddenly after a severe flood in hurricane season). While that last issue is much more severe in coastal areas than in the interior parts of Texas, the point is that we have seen a LOT of strange things in our restoration and reconstruction projects throughout nearby counties (plus we have discussed a massive range of issues in great detail with insurance adjusters, insurance agents, and Dallas city inspectors).
×